Commit fe327729 authored by Turnhout, M.C. van's avatar Turnhout, M.C. van
Browse files

add URLs

parent a49bfac5
......@@ -9,4 +9,6 @@ function nu = bas_D2nu(mu, D)
K = 2/D;
nu = (3*K/mu - 2)/(6*K/mu + 2);
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -125,4 +125,6 @@ for d = 1:numel(basil)
end
end
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -703,3 +703,6 @@ for z = 1:numel(Zs)
end
Vc(:,3) = Vs(:,3);
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -71,3 +71,6 @@ end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -45,4 +45,6 @@ for b = 1:numel(basil)
end
end
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -4,4 +4,6 @@ function R = bas_cylEstVec2rot(P)
[w(1), w(2), w(3)] = sph2cart(P(2),P(3),1);
% axis & angle to rotatiion matrix
% Convert to rotation tensor
R = vecAngle2Rot(P(1),w);
\ No newline at end of file
R = vecAngle2Rot(P(1),w);
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -36,3 +36,6 @@ if nargout > 1
F = [F; F_sub];
F = [F(:,1) F(:,3) F(:,2); F(:,1) F(:,4) F(:,3)]; % Convert to triangles
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -43,4 +43,6 @@ else % cylinder fitting, not sure that I get what is going on...
end
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -170,4 +170,6 @@ for b = 1:numel(basil)
save(fullfile(param.basilhome, num2str(basil(b)), 'Indenter_Lc.mat'),'Li');
end
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -158,4 +158,6 @@ end
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -30,4 +30,6 @@ switch inputStruct.optMethod
case 2 %LSQNONLIN
out = D.^2;
% F_opt=sum(D(:).^2);
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -40,3 +40,6 @@ out = sum(D(:).^2);
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -229,3 +229,6 @@ else
end
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -9,3 +9,6 @@ function basilhome = bas_getDataRoot
basilhome = '/home/mark/tue/WillekeBasil';
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -60,3 +60,6 @@ end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -9,3 +9,6 @@ function bruker = bas_getMRIroot
bruker = '~/BrukerData';
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -76,4 +76,6 @@ end
% 140724.qU1
% 150602.vY1
% '/home/mark/download/NAS/BRUKER/150603*' not found
% getPaths.m (Willeke Traa): 150602 -> 150306-2.vZ1
\ No newline at end of file
% getPaths.m (Willeke Traa): 150602 -> 150306-2.vZ1
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -117,4 +117,6 @@ if exist(filename,'file')
else
disp('Reconstruction file not found {load2dseq}')
out2dseq=[];
end;
\ No newline at end of file
end;
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -105,3 +105,6 @@ end
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
......@@ -113,4 +113,6 @@ end
BGlogic = logical(mask3D);
close(figno)
end
\ No newline at end of file
end
% part of basillab: https://gitlab.tue.nl/stem/basillab/
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment