Commit 16c3d737 authored by Turnhout, M.C. van's avatar Turnhout, M.C. van
Browse files

secure URLS

parent d8888045
......@@ -93,7 +93,7 @@ The benefit of this method is the larger freedom of geometries and meshes. You c
This method requires \texttt{param.buildFEM $\neq$ 'matlab'} and uses \TF{buildFEM} to write the python file that is fed to Abaqus so that Abaqus can write input file (so that \TF{runFEM} can feed the input file to Abaqus).\\
\noindent Note that this method depends on \texttt{aba\_readmesh.m} from \href{http://gitlab.tue.nl/STEM/abalab}{abalab} for parsing of the input file for the mesh and the node sets. \warning
\noindent Note that this method depends on \texttt{aba\_readmesh.m} from \href{https://gitlab.tue.nl/STEM/abalab}{abalab} for parsing of the input file for the mesh and the node sets. \warning
\section{Parameters}
......
......@@ -62,7 +62,7 @@ labdef.FEMbuild = 'python';
%%%%%%%%%%%%%%%%%%%%%%% do not edit below this line %%%%%%%%%%%%%%%%%%%%%%%
% written by TF_labconfig: http://gitlab.tue.nl/STEM/TFlab
% written by TF_labconfig: https://gitlab.tue.nl/STEM/TFlab
% @ 13-Oct-2018 11:53:14
end
\end{lstlisting}
......@@ -229,7 +229,7 @@ labdef.simfailtol = 5;
labdef.fancyest = 0.500000;
labdef.instpath = '/home/mark/git/TFlab/';
labdef.intvars = {'refframe', 'nfilm', 'nframe', 'stack', 'curlcheck', 'simfailtol', 'maxinc', 'nelx', 'nely', 'nelz', 'nCPU', 'submit'};
labdef.TFlabUrl = 'http://gitlab.tue.nl/STEM/TFlab';
labdef.TFlabUrl = 'https://gitlab.tue.nl/STEM/TFlab';
labdef.TFlabBranch = 'testing';
labdef.TFlabVersion = '0.1+';
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
......@@ -284,7 +284,7 @@ labdef.simfailtol = 5;
labdef.fancyest = 0.500000;
labdef.instpath = '/home/mark/git/mylab/matlab/TFlab/';
labdef.intvars = {'refframe', 'nfilm', 'nframe', 'stack', 'curlcheck', 'simfailtol', 'maxinc', 'nelx', 'nely', 'nelz', 'nCPU', 'submit'};
labdef.TFlabUrl = 'http://gitlab.tue.nl/STEM/TFlab';
labdef.TFlabUrl = 'https://gitlab.tue.nl/STEM/TFlab';
labdef.TFlabBranch = 'testing';
labdef.TFlabVersion = '0.1+';
labdef.test = 1.000000;
......
......@@ -80,7 +80,7 @@
% document specific conventions
\newcommand\warning{\marginpar{\center\includegraphics[width=1cm]{Exclamation.png}\\}}
\newcommand\curver{\href{http://gitlab.tue.nl/STEM/TFlab/tags}{v0.2}}
\newcommand\curver{\href{https://gitlab.tue.nl/STEM/TFlab/tags}{v0.2}}
%\newcommand\TF[1]{\texttt{TF\_#1}}
\renewcommand{\ten}[2][]{%
\hbox to 0pt{}\ap{#1}\boldsymbol{#2} }%
......@@ -91,14 +91,14 @@
%\cofeAm{0.5}{1.0}{125}{10cm}{-1cm}
%%\cofeBm{alpha}{scale}{angle}{xoff}{yoff}
\begin{center}
\Huge{\textbf{\href{http://gitlab.tue.nl/STEM/TFlab}{TFlab}}}, \href{http://gitlab.tue.nl/STEM/TFlab/commits/v0.2}{v0.2}\\
\Huge{\textbf{\href{https://gitlab.tue.nl/STEM/TFlab}{TFlab}}}, \href{https://gitlab.tue.nl/STEM/TFlab/commits/v0.2}{v0.2}\\
\Huge{\textbf{User manual}}\\
\mbox{}\\
\vfill
\includegraphics[width=\linewidth]{pics/megadef.png}\\
\vfill
\normalsize
\href{http://gitlab.tue.nl/STEM/TFlab}{http://gitlab.tue.nl/STEM/TFlab}
\href{https://gitlab.tue.nl/STEM/TFlab}{https://gitlab.tue.nl/STEM/TFlab}
\end{center}
%\cofeDm{0.7}{0.25}{-20}{4cm}{6cm}
%%\cofeCm{alpha}{scale}{angle}{xoff}{yoff}
......
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment